Are you looking for Sunshine Coast electronic product design services for a unique idea not yet available on the market? Need an experienced circuit designer, mixed-signal / ADC engineer, wireless electronics engineer, control systems engineer, or professional PCB (printed circuit board) design expert to bring your innovation to life? Whether you're seeking proof-of-concept development, schematic and PCB layout review, embedded firmware support, or complete end-to-end electronic engineering services, COLETEK Electronics Design Services for Sunshine Coast delivers circuit architecture, schematic capture, PCB layout, embedded firmware, bring-up, testing, enclosure integration, and production-readiness across analog, digital, mixed-signal, power, control, wireless, and connected products.

Our team has decades of combined experience in electronic design, circuit development, prototyping, and low-to-medium volume production consulting. We also specialize in embedded firmware programming for microcontrollers, wireless SoCs, and connected products, including BLE, NFC, UWB, and cellular / GNSS IoT module integration. That includes experience with platforms such as Nordic nRF, pre-certified wireless modules such as Raytac, and cellular / GNSS module families such as SARA and other field-deployed IoT communications ecosystems. With deep experience using a variety of industry-standard and open-source EDA tools, we're well-positioned to meet the needs of startups, research labs, manufacturers, and inventors.

Our electronic design journey began in the 1990s using Protel, now known as Altium Designer. Today, while still proficient in Altium for legacy projects, we prefer open-source tools such as Lepton-EDA (formerly gEDA), pcb-rnd, KiCad, and Eagle. Using Lepton-EDA (formerly gEDA) modular structure, we’ve developed powerful internal tools with Python scripts that auto-generate footprints, BOMs, and price lists by integrating with services like Octopart and DigiKey APIs. These automations reduce project time and cost, improving efficiency for our clients.

Electronics Design Services

Just a small glimpse of the custom electronics that power full-stack products we’ve built for clients.

Our Sunshine Coast custom electronics expertise covers a wide spectrum:

Not sure which platform fits best? Here's a simple starting point (we'll tailor it to your objectives):

We understand that a scalable electronic product often hinges on the firmware layer. A well-selected microcontroller (MCU) or microprocessor (MPU) allows flexibility, reusability, and remote upgrades. We have extensive experience developing embedded firmware and also offer services across:

Our Linux-based development environment, often on Ubuntu/Debian, enables us to run robust development toolchains. Our programming skill set spans C, C++, Python, Bash, JavaScript, and more—allowing us to write firmware, APIs, backend logic, and even full-stack applications when needed.

Of course, no product is complete without physical validation. Our Sunshine Coast PCB assembly and prototyping process ensures reliable testing and debugging. We typically have PCBs fabricated overseas (China) with a 5-day turnaround, using custom stencils for precise surface-mount technology (SMT). We complete in-house reflow soldering using a reflow oven and perform through-hole and fine-pitch rework with manual soldering tools. Our team is comfortable working with 0603 components and smaller. We design for reliability in harsh environments, including marine and industrial conditions where protection and compliance considerations matter.

Electronics Design Services for Sunshine Coast and Prototyping Experience

Our CTO, Luke Cole, previously worked as a "Robotics Engineer" at Hemisphere GPS (now AgJunction), where he implemented GPS-guided auto-navigation systems for agricultural machinery including tractors and quadbikes. His background includes developing indoor tracking systems for Location Aware Technologies (433 MHz), and he has contributed to advanced R&D initiatives at NICTA, CSIRO, and the ANU Robotics Systems Lab led by Alex Zelinsky.

Lance Cole has also contributed to NICTA and led hardware development projects for military-grade systems at EOS, including the Common Remotely Operated Weapon Station (CROWS) used by the U.S. military—demonstrating our deep capability in high-reliability electronics.

We also work on low-power wireless and IoT product development for connected devices, industrial and remote sensing products, smart locks, asset tracking systems, telemetry products, control electronics, and proximity-aware systems. Wearables are one possible application area, but our capability is much broader than that. That includes BLE, NFC tap-to-pair / tap-to-unlock workflows, UWB-enabled positioning / ranging architectures, cellular / GNSS IoT module integration, and device-to-cloud systems using protocols such as MQTT. Depending on the application, this may involve platforms such as Nordic nRF, pre-certified module vendors such as Raytac, SARA / u-blox / Trasna cellular module families, Telit Cinterion, and other communications ecosystems used in remote monitoring and field deployments.

Whether you’re building a custom PCB, industrial control electronics, instrumentation hardware, embedded IoT product, remote telemetry device, robotics electronics stack, marine electronics system, or a production-ready connected product, COLETEK Electronics Design Services for Sunshine Coast offers the full stack of electronic design services from concept, design, and prototype through testing, iteration, and production support.

Electronic design and fault investigation for Sunshine Coast products

When a product's electronics behave differently under load, replacing parts may leave the underlying problem unresolved. For Sunshine Coast businesses developing or refining an electromechanical product, COLETEK offers an engineering discussion centred on how the circuit, power source, control behaviour and mechanical load interact.

A motor-system problem investigated for Salita

Greg Finlay of Salita describes engaging Luke Cole to investigate a drive-motor system operating with varying torque and speed. His testimonial reports unexplained failures and sudden reversing, followed by testing and analysis from Luke that identified the failure and provided a solution.

That example concerns investigation of a particular system, rather than a claim that every motor problem has the same cause. For your product, the useful starting point is a description of normal operation, the behaviour that concerns you and the conditions that reproduce it. The next stage can then focus on evidence from the actual system.

Information that makes an electronics review useful

Whether you have an early prototype or an existing design needing revision, bring the available technical information. We can discuss where design work, testing or further investigation would be most useful. Helpful material includes:

  • Schematics, board photographs, component details and any available firmware information.
  • The supply voltage, power source and expected operating loads.
  • Measurements or recordings showing the fault, including when it does not occur.
  • Details of the motor, actuator, sensor or other equipment connected to the electronics.
  • Previous modifications and the effect each change had on the behaviour.

For a new design, describe the intended inputs, outputs and operating conditions instead. Contact COLETEK about your Sunshine Coast electronics project with the current design stage and the question you need the engineering work to answer.

Electronics Design Services for Sunshine Coast – Our Clients: Big Brands & Small Businesses


Electronics Design Services for Sunshine Coast – Selected Client Testimonials

This is a sample of public feedback from a broader range of client work.

Great prototype product made to our specs with minimal fuss. Delivered on time and within budget. Thanks team.

I used COLETEK for the design and prototyping of a new medical airway device I invented. They were enthusiastic, responsive to my input and I was very satisfied with the product they gave me. I can strongly recommend their services.

Salita engaged Luke Cole to troubleshoot issues we were having with a drive motor system with a dynamic variance of torque and speed. After approaching no less than a dozen Australian supplier and engineering firms to provide a solution, and after 12 months of product design and testing, they could not verify why their recommended motors where failing and reversing suddenly. Luke undertook testing and analysis and quickly supplied information on the failures. Not only did Luke uncover a rare, uncommon failure but also provided a solution. The COLETEK team are our go to for the correct solution the first time, for all our electronic needs.

I'm in the early stages of my prototype design. I have worked with Luke for a couple of years now and in that time I have found Luke to be very reliable, responsible with my design, honest and trustworthy. What stood out the most was Luke's pride and commitment that he undertakes to ensure a positive outcome. I consider it a privilege to call Luke an associate and have no hesitation in encouraging others to do the same.