Electronics Design Services for Upper Mangrove Prototypes & Products

The engineers, developers, and electronics designers at Electronics Design Services for Upper Mangrove Prototypes & Products bring together more than 50 years of combined experience in electronic circuit design, PCB layout, and embedded systems development, serving clients across Australia and internationally. From concept to prototype, we specialize in delivering complete electronic product development services—whether you need a simple microcontroller-based design or a complex, multilayer system with custom firmware and PC software integration.

Our core competencies include digital electronics, embedded software (firmware), wireless communication protocols (Bluetooth, Zigbee, LoRa, Wi-Fi), wireless charging solutions, and sensor/actuator interfacing. We design for real-world connectivity—linking your product to PCs, custom LCDs, industrial control systems, and cloud-based platforms.

Whether you're creating a new IoT device, an industrial automation controller, or a wearable electronic product, our team can assist from initial concept and schematic capture to PCB prototyping, firmware development, and final product testing. We are fluent in embedded platforms such as STM32, ESP32, Atmel AVR, ARM Cortex-M, and work with real-time operating systems and Linux-based embedded environments.

Our electronic design capabilities are complemented by compliance with globally recognized standards. We develop to the following IEEE and IPC standards for quality, reliability, and consistency in both prototyping and production stages:

IPC-7711A/7721A – Rework and repair standards for electronics
IPC-A-600G – Acceptability of printed circuit boards
IPC-A-610D – Electronic assemblies acceptability criteria
IPC/WHMA-A-620 – Requirements for cable and wire harness assemblies
ISO 9001:2000 – Quality management systems

Some of Our Electronics Experience

Our CTO, Luke Cole, brings extensive experience in applied robotics and GPS-based automation systems. He previously worked as a "Robotics Engineer" at Hemisphere GPS, where he developed auto-guidance solutions for agricultural vehicles such as tractors and quadbikes.

Luke also contributed to advanced location-tracking technologies during his time at Location Aware Technologies (433), developing indoor positioning systems for commercial and industrial use. He has worked on cutting-edge research projects for Australia's most prestigious institutions, including NICTA, CSIRO, and the ANU Robotics Systems Lab, led by Prof. Alex Zelinsky.

Lance Cole has also worked at NICTA and brings deep experience in high-reliability hardware development. He previously worked for a defense technology contractor building advanced military systems, including contributions to the EOS project, where he helped engineer components for the Common Remotely Operated Weapon Station (CROWS) used by the US military.

Our knowledge base began in New South Wales (NSW) and the Australian Capital Territory (ACT), but we now primarily serve clients across East Coast Queensland, including Brisbane, the Sunshine Coast, and the Gold Coast. For more details on specific services, explore: Electronic Design, Embedded Systems, and Embedded Linux Development.

Whether you’re a startup bringing a new device to market or an established business looking to upgrade an existing product line, Electronics Design Services for Upper Mangrove Prototypes & Products is your trusted partner for high-performance, reliable electronic engineering and prototyping services. Contact us today to get started.

Solutions for Businesses in Upper Mangrove, New South Wales, Australia - COLETEK's Expertise in Action

As a multidisciplinary Australian engineering and product development company established in 2001, COLETEK has earned a trusted national reputation for delivering innovative solutions to businesses across Upper Mangrove, New South Wales, Australia. Our long history of collaboration with local companies has enabled us to develop deep understanding of the needs and challenges specific to the area. Based in Upper Mangrove, New South Wales, Australia, we operate throughout the region, serving businesses in industries ranging from manufacturing and logistics to healthcare and education. Our team's diverse skill set allows us to tackle complex projects that require a holistic approach, leveraging expertise in engineering design, prototyping, testing, and production to create tailored solutions. Our commitment to reliability and capability has earned COLETEK a reputation as a partner businesses can trust. We take the time to listen to your specific needs, working closely with you to develop solutions that meet your unique goals and objectives. Our multidisciplinary team is equipped to handle projects of all sizes and complexity, from small-scale product development to large-scale system integration. When you need expert engineering and product development services in Upper Mangrove, New South Wales, Australia or beyond, look no further than COLETEK. We're dedicated to delivering high-quality solutions that drive innovation and growth for our clients. Our team is passionate about solving real-world problems and making a positive impact on the community. COLETEK has extensive experience working with businesses in Upper Mangrove, New South Wales, Australia, helping them overcome challenges and achieve their objectives. We understand the importance of local knowledge and are committed to supporting the regional economy through our work. Whether you're looking to improve processes, develop new products or services, or enhance your competitiveness, COLETEK is well-positioned to help.

Let’s build something remarkable together.

Electronics Design Services for Upper Mangrove Prototypes & Products – Our Clients: Big Brands & Small Businesses

Electronics Design Services for Upper Mangrove Prototypes & Products – Selected Client Testimonials

This is a sample of public feedback from a broader range of client work.

I recently discovered COLETEK after I accidently managed to fry the PCB on my hard drive. The drive contained 13 years worth family photos and wasn't comfortable sending it off where it could be damaged more or lost in the post. After spending hours researching and emailing different data recovery companies, I decided on COLETEK. Luke was very helpful and let me know the estimated costs up front, and was able to quickly do the repairs necessary to get my drive running like new again. I was able to back up the whole drive and the bill ended up cheaper than the original quote. I can highly recommend them and have already sent a friend to get their drive repaired too.

Jesse Bogaert
Northern Rivers, NSW, Australia

COLETEK have provided one to one communication throughout the development process and gone above and beyond in bringing our ideas closer to becoming a reality! Luke's expertise and knowledge with computer software and electronics is Jedi like, but what I liked most about working with him was his willingness and ability to think outside of the box.

Jarrod Stephens
Sydney, NSW, Australis

Over five years, we've partnered with COLETEK to deliver a sensational end-to-end product. Their expertise across hardware and software development has streamlined and expedited our project to market, achieving great success.

Blair McDonough
Elora Solutions, Sydney, NSW, Australia

I was grateful to find Luke Cole at COLETEK in the early days of an invention idea. He was very patient and generous with information to guide me along the way. And even though I did not preceed with my project, I would still recommend his services. Thank you.

Astrid Van Ewyk
Sydney, NSW, Australia

As the proprietor a DIY environmentally pest control products business I have been more then impressed with COLETEK's design capability and professionalism in assisting to realise an idea into reality. From concept, CAD drawings, 3D modelling, alterations right through to the finished product. I am extremely happy with our new termite control product. I have no hesitation in recommending COLETEK's services.

Paul Faranda
EBC Enviro Bug Control, Northern Rivers, NSW, Australia

I have been working closely with COLETEK for the past 6 years now, and I must say, it is a success story :-). I highly respect their team, they are a pleasure to work with and top skilled professionals. In addition to their top Technical service, their customer service is brilliant and it is a rare find. Their PCB repair rework skills are top notch and a rare find in this industry. I have been working in the IT industry for the past 20 years in various fields and seen it all so I can say with certainty that they are the best around and I am looking forward to keep working with them in the future.

Oded Kuznik
IT Land, Tweed Coast, NSW, Australia

Intuitive, innovative & efficient are three words that would appropriately describe the COLETEK service. Luke and the team at COLETEK have taken our concepts to the next level.

Alan Hay
Boylan Group, Sydney, NSW, Australia

Founded in 2001, COLETEK is a founder-led Australian engineering company helping clients develop new products, prototypes, electronics, embedded systems, IoT products, AI-enabled devices, intelligent machines, and robotics systems.

We work across electronics, embedded firmware, IoT connectivity, software, mechanics, and real-world testing, with strong experience in multidisciplinary product development, connected devices, computer vision, precision motor control, robotics, and autonomy.

Services Links

Useful Links

Location

Head Office: Gold Coast, Australia
Australia-wide support and remote collaboration
Servicing worldwide, notably:
Australia, NZ, UK, USA, Canada, Europe, UAE, and Asia