Are you looking for Brisbane electronic product design services for a unique idea not yet available on the market? Need an experienced circuit designer, mixed-signal/ADC engineer, or professional PCB (printed circuit board) design expert to bring your innovation to life? Whether you're seeking a proof-of-concept, schematic and layout review, embedded programming support, or complete end-to-end electronic engineering services, Electronics Design Services for Brisbane has the expertise to deliver.
Our team has decades of combined experience in electronic design, circuit development, prototyping, and low-to-medium volume production consulting. We also specialize in embedded firmware programming for microcontrollers and SoCs. With deep experience using a variety of industry-standard and open-source EDA tools, we're well-positioned to meet the needs of startups, research labs, manufacturers, and inventors.
Our electronic design journey began in the 1990s using Protel, now known as Altium Designer. Today, while still proficient in Altium for legacy projects, we prefer open-source tools such as Lepton-EDA (formerly gEDA), pcb-rnd, KiCad, and Eagle. Using Lepton-EDA (formerly gEDA) modular structure, we’ve developed powerful internal tools with Python scripts that auto-generate footprints, BOMs, and price lists by integrating with services like Octopart and DigiKey APIs. These automations reduce project time and cost, improving efficiency for our clients.
Our Brisbane custom electronics expertise covers a wide spectrum:
- 30+ years in analog and digital circuit design, prototyping and firmware development
- ADC front-end design and signal conditioning (current, voltage, resistance, and mixed-signal sensing)
- RF design and wireless communication protocols (WiFi, Bluetooth, Zigbee, proprietary long-range RF, Cellular, Satellite)
- Microcontroller platforms: TI MSP430, ST STM32, ESP32, FPGA
- Battery and power systems: PMIC, Li-Ion/Li-Po charging, wireless (inductive) charging
- Sensor integration: IMU, accelerometers, gyros, image sensors, lidar, radar, ultrasonic, IR, and industrial instrumentation sensors
- Motor and actuator control: brushed and brushless DC motors (BLDC), servos, steppers, pneumatics, hydraulics
- Communication protocols: I2C, SPI, UART, RS232, RS485, RS422, Ethernet, USB, GPS, Cellular, Satellite
- IoT device development and wearable electronics (e.g., LilyPad, conductive thread)
- Input protection and robust interface design (ESD/TVS, surge, opto, ferrite, current-limiting, polyfuse, reverse polarity, miswiring)
- Compliance-minded design for harsh environments (industrial and marine applications)
- Cost-effective embedded Linux solutions (from minimal userspace builds to full SBC platforms)
Not sure which platform fits best? Here's a simple starting point (we'll tailor it to your objectives):
- Need Linux, camera, vision, "PC-like" apps → Raspberry Pi or NVIDIA Jetson
- Need on-device AI/ML inference (vision/audio/anomaly detection) → Raspberry Pi / NVIDIA Jetson, or AI-capable MCUs (e.g., STM32-class) for lightweight models
- Need Wi-Fi/BLE built-in → ESP32
- Need hard real-time + rich peripherals → STM32
- Need "sip power for a year" sensing → MSP430 (and other ultra-low-power MCU families)
We understand that a scalable electronic product often hinges on the firmware layer. A well-selected microcontroller (MCU) or microprocessor (MPU) allows flexibility, reusability, and remote upgrades. We have extensive experience developing embedded firmware and also offer services across:
- Application software development for desktop and mobile
- GUI design for user interfaces on embedded systems and control panels
- Cross-platform development using Linux, Windows, and macOS (typically via VirtualBox or Docker)
- Full-stack web development for connected device dashboards
Our Linux-based development environment, often on Ubuntu/Debian, enables us to run robust development toolchains. Our programming skill set spans C, C++, Python, Bash, JavaScript, and more—allowing us to write firmware, APIs, backend logic, and even full-stack applications when needed.
Of course, no product is complete without physical validation. Our Brisbane PCB assembly and prototyping process ensures reliable testing and debugging. We typically have PCBs fabricated overseas (China) with a 5-day turnaround, using custom stencils for precise surface-mount technology (SMT). We complete in-house reflow soldering using a reflow oven and perform through-hole and fine-pitch rework with manual soldering tools. Our team is comfortable working with 0603 components and smaller. We design for reliability in harsh environments, including marine and industrial conditions where protection and compliance considerations matter.
Just a small glimpse of the custom electronics that power full-stack products we’ve built for clients.
Electronics Design Services for Brisbane and Prototyping Experience
Our CTO, Luke Cole, previously worked as a "Robotics Engineer" at Hemisphere GPS (now AgJunction), where he implemented GPS-guided auto-navigation systems for agricultural machinery including tractors and quadbikes. His background includes developing indoor tracking systems for Location Aware Technologies (433 MHz), and he has contributed to advanced R&D initiatives at NICTA, CSIRO, and the ANU Robotics Systems Lab led by Alex Zelinsky.
Lance Cole has also contributed to NICTA and led hardware development projects for military-grade systems at EOS, including the Common Remotely Operated Weapon Station (CROWS) used by the U.S. military—demonstrating our deep capability in high-reliability electronics.
Whether you’re building a custom sensor board, developing an embedded IoT product, or designing the next big wearable device, Electronics Design Services for Brisbane offers the full stack of electronic design services—from idea to working prototype and beyond.
Electronics Design Services in Brisbane, Queensland, Australia
COLETEK empowers businesses in Brisbane, Queensland, Australia, to innovate and transform their ideas into reality through exceptional electronics design services. Our team of experienced engineers has successfully delivered over 150 product development and R&D projects across hardware and software, encompassing custom PCB development, sensor integration, and complex mixed-signal electronics.
We understand the unique challenges faced by businesses in various industries, from industrial environments to remote agricultural settings. Our approach emphasizes close collaboration, leveraging both remote working tools and physical prototype shipments for seamless review and iteration. We seamlessly navigate from concept ideation through prototyping, integration, testing, and production-readiness, ensuring a seamless handover to your team.
Our expertise spans the entire spectrum of electronics design, encompassing schematic capture, PCB layout, ADC front-ends, power design, MCU integration, and interface protection. We leverage advanced tools and technologies to deliver robust and reliable electronic solutions tailored to your specific needs.
At COLETEK, we believe in empowering businesses to achieve remarkable outcomes. Our commitment to innovation, collaborative approach, and proven track record make us the ideal partner for your electronics design journey. Let's work together to bring your vision to life.
For further insights into our capabilities and client testimonials, please explore our website or contact us directly to discuss your project requirements.
Let’s build something remarkable together.
Contact UsElectronics Design Services for Brisbane – Our Clients: Big Brands & Small Businesses
Electronics Design Services for Brisbane – Amazing Customer Testimonials
We used COLETEK on a small project involving mechanical and electronic design aspects as well as software development. COLETEK understood our requirements at the outset and worked to accommodate our needs. The whole process was professionally conducted and we highly recommend COLETEK
We worked with Luke from COLETEK to develop a prototype for a new venture. Luke was able to give us practical advice on how to execute the project inline with our budget that was super useful. What has been endearing, is that even after the build was complete, Luke continues to touch base with us offering help to keep the momentum of the project going forward.
We met with Luke Cole from COLETEK and very quickly realised that he was very knowledgeable in robotics and prototyping. What separates his company from the rest, is that he had a unique value proposition - COLETEK offers a tele-operated / robotic unit for rent and with the flexibility to be modified to build proof-of-concepts. That unit lowered both the cost and time for us to produce a video showing a very challenging concept. In general COLETEK's service was great value. We would recommend them - they will get it done.
Luke and the team do a amazing job. Extremly happy from start to finish
In the development of our new product Smart Syphon we had a tight deadline to launch the commercial version of our product and experienced some issues with our drawings. Luke and his team dealt with the issues, worked through the week-end and delivered a quality outcome on time.
I would thoroughly recommend COLETEK they provided me with excellent feedback and engineering knowledge with regards to our idea. They also have continued to help us with what direction we should take and introduced us to other professionals that have also guided us. I suggest anyone who has been thinking of something they would like to pursue should contact them to get the most realistic approach of making it successful.
Luke (COLETEK) did an amazing job helping me take an idea through technical design, proof of concept and prototype development. Luke immediately understood the requirements, delivered to a budget, within the required timeframe and the whole process was extremely professional. I highly recommend for any design and prototype work you can imagine.
After approaching COLETEK with a few sketches of a plumbing tool I had in mind Luke and I immediately bounced a few ideas around. Leaving things with Luke he quickly produced some 3D images and ideas we subsequently used. Before long COLETEK produced an operational 3D printed prototype of the tool. I was then able to use this prototype to seek funding for further research and development.
I consulted COLETEK for some work, commencing in 2014, and haven’t looked back. The project was very important to me, and COLETEK not only saw that but exuded sincere enthusiasm about the project; they are attentive, and thorough in their research and development service. They are a wealth of information and advice, for many aspects of the entire engineering and commercialization space, and this has been invaluable to me. I look forward to continuing work with them long into the future!
Luke from COLETEK has assisted us on a number of occasions and has always been helpful, courteous and understanding of our needs. There was an instance when timing was of the essence and Luke was able to prioritise our job to ensure we weren't affecting our customers in a negative way. He is highly recommended.
Founded in 2001, we are a multiple award winning, highly experienced multidisciplinary company specialising in lean product development through rapid prototyping - transforming ideas from concept to life. Our industry-leading team combines deep expertise, cutting-edge technology, and advanced equipment to validate emerging ideas—transforming them into market-ready hardware and software solutions.
Our experience dates back to the 1990s with ANU "Robotics Systems Lab", CSIRO, NICTA (aka Data61), Seeing Machines, Location Aware Technologies, and Hemisphere GPS (aka BEELINE). For over 10 years now, we've been focused on validating R&D and taking ideas to commercialisation.
Services Links
Useful Links
Location
Servicing worldwide, notably:
Australia, NZ, UK, USA, Canada, Europe, UAE, and Asia