Are you looking for Fisher electronic product design services for a unique idea not yet available on the market? Need an experienced circuit designer, mixed-signal/ADC engineer, or professional PCB (printed circuit board) design expert to bring your innovation to life? Whether you're seeking a proof-of-concept, schematic and layout review, embedded programming support, or complete end-to-end electronic engineering services, Electronics Design Services for Fisher has the expertise to deliver.
Our team has decades of combined experience in electronic design, circuit development, prototyping, and low-to-medium volume production consulting. We also specialize in embedded firmware programming for microcontrollers and SoCs. With deep experience using a variety of industry-standard and open-source EDA tools, we're well-positioned to meet the needs of startups, research labs, manufacturers, and inventors.
Our electronic design journey began in the 1990s using Protel, now known as Altium Designer. Today, while still proficient in Altium for legacy projects, we prefer open-source tools such as Lepton-EDA (formerly gEDA), pcb-rnd, KiCad, and Eagle. Using Lepton-EDA (formerly gEDA) modular structure, we’ve developed powerful internal tools with Python scripts that auto-generate footprints, BOMs, and price lists by integrating with services like Octopart and DigiKey APIs. These automations reduce project time and cost, improving efficiency for our clients.
Our Fisher custom electronics expertise covers a wide spectrum:
- 30+ years in analog and digital circuit design, prototyping and firmware development
- ADC front-end design and signal conditioning (current, voltage, resistance, and mixed-signal sensing)
- RF design and wireless communication protocols (WiFi, Bluetooth, Zigbee, proprietary long-range RF, Cellular, Satellite)
- Microcontroller platforms: TI MSP430, ST STM32, ESP32, FPGA
- Battery and power systems: PMIC, Li-Ion/Li-Po charging, wireless (inductive) charging
- Sensor integration: IMU, accelerometers, gyros, image sensors, lidar, radar, ultrasonic, IR, and industrial instrumentation sensors
- Motor and actuator control: brushed and brushless DC motors (BLDC), servos, steppers, pneumatics, hydraulics
- Communication protocols: I2C, SPI, UART, RS232, RS485, RS422, Ethernet, USB, GPS, Cellular, Satellite
- IoT device development and wearable electronics (e.g., LilyPad, conductive thread)
- Input protection and robust interface design (ESD/TVS, surge, opto, ferrite, current-limiting, polyfuse, reverse polarity, miswiring)
- Compliance-minded design for harsh environments (industrial and marine applications)
- Cost-effective embedded Linux solutions (from minimal userspace builds to full SBC platforms)
Not sure which platform fits best? Here's a simple starting point (we'll tailor it to your objectives):
- Need Linux, camera, vision, "PC-like" apps → Raspberry Pi or NVIDIA Jetson
- Need on-device AI/ML inference (vision/audio/anomaly detection) → Raspberry Pi / NVIDIA Jetson, or AI-capable MCUs (e.g., STM32-class) for lightweight models
- Need Wi-Fi/BLE built-in → ESP32
- Need hard real-time + rich peripherals → STM32
- Need "sip power for a year" sensing → MSP430 (and other ultra-low-power MCU families)
We understand that a scalable electronic product often hinges on the firmware layer. A well-selected microcontroller (MCU) or microprocessor (MPU) allows flexibility, reusability, and remote upgrades. We have extensive experience developing embedded firmware and also offer services across:
- Application software development for desktop and mobile
- GUI design for user interfaces on embedded systems and control panels
- Cross-platform development using Linux, Windows, and macOS (typically via VirtualBox or Docker)
- Full-stack web development for connected device dashboards
Our Linux-based development environment, often on Ubuntu/Debian, enables us to run robust development toolchains. Our programming skill set spans C, C++, Python, Bash, JavaScript, and more—allowing us to write firmware, APIs, backend logic, and even full-stack applications when needed.
Of course, no product is complete without physical validation. Our Fisher PCB assembly and prototyping process ensures reliable testing and debugging. We typically have PCBs fabricated overseas (China) with a 5-day turnaround, using custom stencils for precise surface-mount technology (SMT). We complete in-house reflow soldering using a reflow oven and perform through-hole and fine-pitch rework with manual soldering tools. Our team is comfortable working with 0603 components and smaller. We design for reliability in harsh environments, including marine and industrial conditions where protection and compliance considerations matter.
Just a small glimpse of the custom electronics that power full-stack products we’ve built for clients.
Electronics Design Services for Fisher and Prototyping Experience
Our CTO, Luke Cole, previously worked as a "Robotics Engineer" at Hemisphere GPS (now AgJunction), where he implemented GPS-guided auto-navigation systems for agricultural machinery including tractors and quadbikes. His background includes developing indoor tracking systems for Location Aware Technologies (433 MHz), and he has contributed to advanced R&D initiatives at NICTA, CSIRO, and the ANU Robotics Systems Lab led by Alex Zelinsky.
Lance Cole has also contributed to NICTA and led hardware development projects for military-grade systems at EOS, including the Common Remotely Operated Weapon Station (CROWS) used by the U.S. military—demonstrating our deep capability in high-reliability electronics.
Whether you’re building a custom sensor board, developing an embedded IoT product, or designing the next big wearable device, Electronics Design Services for Fisher offers the full stack of electronic design services—from idea to working prototype and beyond.
Electronics Design Services for Weston Creek, Australian Capital Territory, Australia
At COLETEK, we empower businesses in Weston Creek to harness the power of innovative electronics design. Our team of experienced engineers specializes in crafting custom electronic solutions that meet the unique needs of your industry. From conceptualization through production-readiness, we guide you through every step of the process.
Our expertise encompasses various project types, including custom PCB development, sensor and interface boards, mixed-signal electronics, wireless products, and embedded hardware for prototypes and products. We leverage advanced technologies like schematic capture, PCB layout, ADC front-ends, power design, MCU integration, and interface protection to deliver robust and reliable solutions.
We understand the importance of collaboration in remote environments. Our Australia-wide support network enables seamless interaction and efficient review of physical prototypes. We prioritize clear communication and timely updates throughout the process to ensure your complete peace of mind.
Whether your project demands deployment in industrial, coastal, remote, or agricultural settings, our team has the experience and knowledge to navigate diverse environments. We have successfully delivered over 150 R&D and product development projects across hardware and software, demonstrating our proficiency in bringing innovative ideas to life.
Let us join forces and transform your vision into reality. Contact COLETEK today to schedule a consultation and discuss how our Electronics Design Services can empower your business in Weston Creek, Australian Capital Territory, Australia.
Let’s build something remarkable together.
Contact UsElectronics Design Services for Fisher – Our Clients: Big Brands & Small Businesses
Electronics Design Services for Fisher – Amazing Customer Testimonials
We had the opportunity to work with Coletek on the re-work of some complex SMD PCB assemblies during 2019. The work was carried out to a very high standard and we were extremely pleased with the outcome. We would not hesitate to recommend COLETEK for any type of complex technology work requiring high accuracy and professionalism.
Delivered excellence on time, great work and great team, thanks!
We've worked with Luke and the team on and off for the past two years. We've found them very accessible and extremely thorough in their dealings. Their documentation is second to none and we’d have no hesitation recommending them on this basis alone.
Founded in 2001, we are a multiple award winning, highly experienced multidisciplinary company specialising in lean product development through rapid prototyping - transforming ideas from concept to life. Our industry-leading team combines deep expertise, cutting-edge technology, and advanced equipment to validate emerging ideas—transforming them into market-ready hardware and software solutions.
Our experience dates back to the 1990s with ANU "Robotics Systems Lab", CSIRO, NICTA (aka Data61), Seeing Machines, Location Aware Technologies, and Hemisphere GPS (aka BEELINE). For over 10 years now, we've been focused on validating R&D and taking ideas to commercialisation.
Services Links
Useful Links
Location
Servicing worldwide, notably:
Australia, NZ, UK, USA, Canada, Europe, UAE, and Asia